Ruyi series 36w/56w Solar Street Light

Symmetric reinforcing frame on all sides of the lamp body; high overall structural strength with stronger impact and vibration resistance
High-density LED  dot matrix arrangement for uniform light output, avoiding alternating bright and dark spots on the road surface
56W  specification is equipped with a larger capacity battery for more ample battery life after time-based power reduction in the middle of the night
Pole mounting bracket uses a rotary snap-lock design for convenient on-site installation and removal, facilitating later maintenance
The outer frame structure effectively protects the lamp cover glass, reducing damage risk from impact or transportation

Reinforced Frame for Better Outdoor Durability
The lamp body frame structure is specifically designed to improve the mechanical strength of the entire lamp. Under complex rural road construction environments and bumpy transportation conditions, the lamp body damage rate is low, reducing cargo damage claims from transportation and installation damage.

36W/56W Covers Main Power Requirements for Township Roads
Township street widths are mostly in the range of 6–10m ; 36W  is suitable for road widths 6–7m  low-traffic roads, while 56W  is suitable for road widths 8m  and above for township main streets. The two specifications basically cover the main selection needs for township roads.

Rotary Snap-Lock Bracket for High Maintenance Efficiency
Compared to traditional bolt-fixed methods, the rotary snap-lock bracket allows quick removal of the lamp head during routine inspections to check internal components, reducing maintenance time and suitable for periodic inspection operations of large-scale street light installations.

Q1: Is the Ruyi series reinforced frame made of aluminum alloy? Will it rust?
A: Both the outer frame and lamp body are made of aluminum alloy with oxidation treatment on the surface. Aluminum alloy does not rust and has good corrosion resistance even in coastal salt spray environments.

Q2：36W  street light spacing be set?
A: Using an installation height of 6m  as reference, single-side lamp spacing is recommended at 20–25m, and double-side staggered lamp spacing can be extended to 30m. Specific recommendations should be calculated based on road width and illuminance targets; RISUN Group can provide free illuminance simulation services.

Q3: Can the Ruyi series be used in installation environments with obstructions (such as under tree shade)?
A: Solar integrated lamps are very sensitive to obstructions; tree shade and building obstructions will significantly reduce power generation and affect battery life. If the installation environment has obstructions, it is recommended to choose a split-type solar street light (PV panel can be adjusted independently) or use a grid-powered street light solution.